Audio-Technica System 10 ATW-1322

Audio-Technica System 10 ATW-1322


This site is not processing orders. The website & domain are for sale.
Audio-Technica System 10 ATW-1701/P

Audio-Technica System 10 ATW-1701/P

Audio-Technica MB3K

Audio-Technica MB3K

Audio-Technica System 10 ATW-1322

Two System 10 receivers in a rackmountable chassis with removable antennas. Includes two handheld microphones.
£715.00
Availability: Out of stock
SKU
ATW-1322

Audio-Technica System 10 ATW-1322

The Audio-Technica System 10 PRO builds on the winning System 10 formula, placing it in a format better suited to professional users and larger applications.

System 10 uses 2.4 GHz wireless technology to avoid TV interference which often plagues traditional wireless systems. Three types of diversity assurance (providing two copies of the signal so one can act as a 'back up' if required) and 'channel hoping' are utilized by the System 10, ensuring signal integrity is preserved throughout any performance.

The System 10 PRO expands on this technology, providing two receiver units in a half-rack chassis so multiple systems can be run alongside each other for large performances. In addition, each receiver has a detachable module which can be mounted nearer to where the wireless microphones are in use, providing increased signal strength. The modules can be taped to a flat surface or even mounted on a microphone stand.

A total of five System 10 PROs (10 receivers) can be linked with a RJ12 cable, allowing each unit to communicate and automatically set up the best wireless configuration for performance and reliability.

The ATW-1322 configuration includes two System 10 handheld microphones.

  • VERALL SYSTEM
  • Operating Frequencies: 2.4 GHz ISM band
  • Dynamic Range: >109 dB (A-weighted), typical
  • Total Harmonic Distortion: <0.05% typical
  • Operating Range: 60 m (200') Open range env. with no interfering signals
  • Operating Temperature Range: 0 C to +40 C (32 F to 104 F) Battery performance may be reduced at very low temperatures
  • Frequency Response: 20 Hz to 20 kHz Depending on microphone type
  • Audio Sampling: 24 bit / 48 kHz
  • Latency: 3.8 ms
  • ATW-RC13 RECEIVER CHASSIS
  • Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
  • Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") Hx 169.3 mm (6.67") D
  • Net Weight: 940 grams (33.2 oz)
  • Remote Receiver Connector: RJ45
  • Link Connector: RJ12
  • Accessories: Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
  • ATW-RU13 RECEIVER UNIT
  • Receiving System: Diversity (frequency/time/space)
  • Dimensions: 57 mm (2.24") W x 19 mm (0.75") H x 77.6 mm (3.06") D
  • Net Weight: 64 grams (2.3 oz)
  • Remote receiver connector: RJ45
  • Mounting Thread Insert: 1/4" x 20
  • Accessories: Included Antennas, AT8690 RU13 holder
  • HANDHELD TRANSMITTER
  • RF Output Power: 10 mW
  • Spurious Emissions: Following federal and national regulations
  • Batteries (not included): Two 1.5V AA
  • Battery Life: >7 hours (alkaline) Depending on batt. type & use pattern
  • Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
  • Net Weight (w/o batteries): 280 grams (9.9 oz)
  • Accessory Included: AT8456a Quiet-Flex stand clamp
Write Your Own Review
You're reviewing:Audio-Technica System 10 ATW-1322
Your Rating